Replacement UPVC Door Handles
You can find the perfect handle for your door, whether you're replacing your existing handles or adding extra security. Upvc handles are simple to fit and comply with the 92mm centers required by multipoint locks.
The most important measurements to consider are backplate fixing centres as well as key hole dimensions for levers and levers. Check these measurements against your existing marks carefully before ordering.
Lever/Pad
Lever pad handles are made up of a lever on one side and a paddle-shaped handle on the other. They are designed to be used with key wind locks, however, they can also be used to split spindle multipoint door locks (though you'll require a separate dual spindle lock case).
Our range of upvc handle lever pads are available in a wide variety of finishes and these will be shown in the drop-down menu once you have found the perfect handle for your doors. Not all styles of handles are available in every finish and you should always look over the sizes and technical drawings for the specific product that you're looking for to ensure that you get the correct size and fit.
It is crucial to ensure that when you choose a new set upvc lever pad handles, they match the PZ (distance from the handle spindle to the center of the hole of the cylinder) of your multipoint door locks. This is because these need to be aligned in order for the doors to stay locked, regardless of whether you are looking from the inside or outside. The handles we sell are designed to work with the majority of standard cylinder locks, however you should always double-check before purchasing.
If you are looking to upgrade to dual spindle levers you'll need to remove the handles you have already installed and disassemble the lock case. This will require an extra split cylinder inline. They can be purchased separately and we offer a full technical diagram for you to take a look at in the pictures for each product.
It is a good thing to loosen the screws holding your existing door handle and then inspect the mechanism. It is possible that you will need to loosen the screws even more when they aren't tight. After that, you can take off the old spindle and handle and put in your new door handle made of upvc. Before you screw the handle into the frame, it is a good idea to check that it is in the proper position. You can do this by putting your finger in the space between the door frame and the door handle to make sure that it is level.
Lever/Lever
The lever door handles are used to operate a multi-point lock with an Euro cylinder. They can be found on many upvc double doors, as well as on some aluminium and wooden doors. They feature a lever inside and a paddle on the outside and are usually supplied in two different types. Sprung - they have a spring cassette fitted inside the backplate to bring the handle lever into an upright position. Non-sprung: These do not include a mechanism that can spring the handle lever to a horizontal position.
To fix a sagging lever door handle you must find the hole for access to the detent or pin, which is usually an elongated or rectangular shape hole or protruding pin that is located on the opposite side of the base plate. Once you have located the hole for accessing the detent or pin, you are able to remove it with the help of a screwdriver.
Once the handle is set horizontally, it is possible to reinstall the screws. Close them to ensure that the handle remains firmly connected to the base plate. Consider applying a threadlocking solution to the threads of screws to increase grip and stop the threads from becoming loose over time.
Drooping lever handles on door handles could be the result of many factors. The most common cause is that the fixings have been over tightened and are putting strain on the bearings of the lever, causing it to bind against the door face. It is also possible that the levers may not have been operated at the correct angle, which stretches the latch mechanism and stops it from fully springing into action.
Another common cause is that the sprung lever is not operating correctly and this is typically due to the sprung not being in the proper position within the backplate. To determine whether door handle repairs near me repairmywindowsanddoors.co.uk has returned to horizontal, simply operate it.
If the door handles aren't tight, it is important to identify the issue fast, as this can lead to excessive wear on the screws and possibly to the handle falling off of the base plate. You should also tighten loose screws frequently to prevent them from becoming looser.
Lever/Snib
These handles made of upvc are called "Snib handle sets" and have an snib lock button located at the top of the lever. If you don't have a dummy lock device then you can use this feature to secure the door. These handles are fitted with a Fullex lock 68PZ. (68mm between the spindle and the lock centre). We also carry a selection of other door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.
The replacement of your door handle is an inexpensive way to update your home, whether replacing existing handles or fitting new ones on doors you've constructed in your home. There are a variety of styles of upvc door handle available, including traditional lever on backplate, straight or curving short latches, and dummy knob handles for multi point locks which are perfect for French doors.
Lever on backplate handles are often rectangular in shape but you can also find circular or oval shaped models that are referred to as rose door handles. These kinds of door handles are equipped with the knob or lever on a backplate, which sits behind the lever or knob and is sometimes called a rosette, although certain backplates can be removed to be concealed for fixing.
There's a wide selection of coloured and chrome finishes for these handles to match your door and other hardware, like hinges, knobs, bolts and so on. Some handles are supplied with grub screws to help firmly attach the knob or lever to the spindle. Some handles come with bathroom spindles, which can be used to make bathroom locks. They also come with an release mechanism that turns the thumb and can be used on doors for bathrooms.
Mortise
If your front door's uPVC handle is stuck in the open position, the reason is most likely to be related to the tubular latch. There could be a variety of reasons for this, one of which is a simple lack of lubrication on the latch plate. This can be resolved quickly by opening the door and spraying lubricant onto the handle and lock. It could also be that the latch plate has been detached from the backplate. This is a more difficult problem that would require the assistance of a specialist.
A multipoint handle system is the ideal solution to stuck door handles. The handles are inserted into the door's faceplate and are operated with an actuated thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles are available in various sizes to fit various kinds of uPVC door and in various attractive finishes that are compatible with the hardware that is currently in use. The handles are available online or from a local locksmith. They are simple to install and come with clear instructions.
You will need to know your PZ size of your cylinder in order to select the right replacement handle set. This is the distance from the edge of the inner frame of the door to the center point of the handle hole in millimetres. You'll also need the type of lock that is installed on your door, regardless of whether it's a mortise or hook lock. Once you have these measurements, the most efficient way to find the correct handles is to use the filter by brand on the website. This will narrow down the options and you can then choose the appropriate size from there.
A typical handle set includes an arm, two screws of different lengths, drill guides and installation instructions. The smarter models, like the Igloohome Smart Mortise 2+ includes a complete mortice lock with a built-in keypad. These are more complicated units that are best for professional installers or highly competent DIYers. Some handle sets include various other accessories, like weather strips that can be used to improve the look of the door.